About our Wood Stains

One gallon of stain covers 400 to 650 sq ft depending on what type of wood you are applying it to. We recommend testing the stain out on a spare piece of like wood or somewhere inconspicuous first before doing the entire project. Note the Agri-Stain’s are all plant and mineral and contain no chemicals and clean up with soap and water. Yet they work much like the old chemical solvent stains did years ago. Application is much the same.

NO, todays name brand conventional water-based stains are not stains, they are actually semitranslucent paints which care called stain. The few that use different component like Linseed oil to name one is water soluble solvent stain. To get the linseed oil to work, it has to go through a process that turns it into a petrochemical solvent. This is why these so-called green stains are so flammable. AgriStain is nonflammable and totally safe, made of plants and minerals.

Normally it will be extremely close and more than likely not far enough off to notice. The best part is repairing a traffic pattern area, you need to make sure you have prepared the area correctly, then apply the stain as you did before over the traffic pattern area and 1 to 2 inches past on either side. Treat the areas in the same way as the original staining. Once it has been all buffed, leave alone for 2 days and it should all blend together on its own.

AgriStain can be applied with any brush, roller, sprayer, rag or by hand in similar fashion to any other conventional oil/solvent stain for the most part. Please read and follow the instructions on the can label.